One of the most important aspects to evaluate is understanding the difference between the Passive and Active Studio Monitor. One aspect to consider before buying a pair of studio monitor speakers is their positioning, which will need to be balanced within your work environment. If you make music at home, in your room or in a small studio, you have to consider where to place it. Their position determines, I do not know the quality of the sound, but also the stereophony and Bulk CDs for Sale.
Avoid the corners, and the proximity from the wall, which emphasize some frequencies creating rumbles. Their ideal positioning is on one side of the wall, in the center, and at a sufficient distance from the wall (0,5 – 1 mt.).
They should not be placed directly above the desk, to avoid transmitting the vibrations to the table. For this reason you can use stand for adjustable studio speakers: to place the speakers behind the desk, but require a larger room. Table insulating pads and Bulk CDs for Sale: designed to improve acoustics, prevent vibrations, and allow the monitors to be oriented correctly.
Monitor and subwoofer decouplers: they are mechanical supports to be placed under the monitors, able to create a “floating” effect, canceling the resonances, and at the same time correcting the phase. For the correct positioning follow these two Golden Rules: the equilateral triangle: the boxes and your head must form an equilateral triangle, 3 points equidistant from each other.
The height and inclination of the speakers: the tweeters, which reproduce the highest frequencies, must be positioned at the height of the ears, or at least inclined towards your face.
The power of a Studio’s Monitor is measured in watts: the higher the watt, the greater the volume the monitor can spread, the greater the available headroom. This is important because with a few watts, transients in the music may cause distortion or clipping.
The average range of human hearing ranges from 20Hz to 20kHz. Monitors, on the other hand, have a different extension, and their frequency range can vary a lot. For example, it can be 35Hz-40kHz or 42Hz-50kHz.
An extension in the low frequencies up to 35Hz means that frequencies below 35Hz will not be handled by that speaker, despite the electrical signal coming to the monitor. But what is the volume issued at that particular frequency? We take for granted that a Studio Monitor is Flat (even if it is not always the case). You must consider that the sound could be Flat in the intermediate frequency range, but go on decreasing as you approach the extremes.
No Comments