The electrostatic sprayer can be used for spraying disinfectant; it is a good idea to use the sprayer. The results will not be as expected if you use a rag or a brush because of poor application and high risk for contamination. To get the best result from your cleaning project using an electrostatic sprayer, here are some steps that should be followed:
1 Selecting Electrostatic Sprayer for Disinfectant — What Is Good To Spray?
Disinfectants that contain phenol derivatives such as sodium hypochlorite (bleach) or quaternary ammonium compounds work well with electric-powered airless sprayers. These chemicals make excellent sanitizers and disinfectants that help decrease the level of microorganisms that grow on surfaces.
2 Prepare The Electrostatic Sprayer — What To Do?
Ensure that the trigger is locked in an open position before you mix the disinfectant with water. Some units allow for adding additional chemicals to be mixed with the solution. If so, measure these accurately to ensure effectiveness and safety. Use 1/8 teaspoon or ½ fluid ounce (or 5ml) of chemical if using a 32-ounce fill bottle for each gallon of water. Pour this into the reservoir tank, where it mixes with water added to the fill line inside the reservoir tank. Other models do not have mixing tubes, which means you will pour all ingredients into your container at once and then fill up your container with water.
3 Connect The Hose And Gun — How To Do It?
Attach the hose to the threaded connector found at the end of the gun. Screw it on tightly by hand. Make sure that it is secure before proceeding. Check for any leaks, and if there are any, tighten the connector or replace the hose as needed.
4 Adjusting The Sprayer — What You Need To Know?
There are usually two types of adjustments that can be made on an electrostatic sprayer: (1) air pressure and (2) fluid pressure. If you are having trouble getting good distribution of the disinfectant, check to make sure that both pressures are set correctly. Increasing one without adjusting the other may produce poor results. In most cases, you will need to readjust one or both of these pressures after changing the tip of the gun.
5 Begin Spraying — How To Do It?
When it comes to spraying with an electrostatic sprayer, there are some features that can help produce better results when Electrostatic Sprayer for Disinfectant on surfaces. First, make sure your spray pattern is adjusted correctly. Second, keep in mind that shorter strokes over the same area work well when applying disinfectant using this tool. Third, you may want to begin spraying about 6 inches away from the surface then move closer as needed for good coverage and particle distribution. By following these tips, your surfaces should dry much faster than you would if you were just wiping them down with a cloth or brush.
Cleaning and disinfecting surfaces can be a daunting task, but it is necessary in order to help protect yourself and your loved ones from harmful microorganisms. Using an electrostatic sprayer can help make this process easier and more efficient so that you can get the job done quickly and correctly.
